Multiboot USB UEFI & Legacy All In One



Multiboot USB UEFI & Legacy All In One
This video shows how to create the ultimate multiboot drive for uefi and legacy in both Windows and Linux!

┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅
– Live Stream Archives ➜
– Recommended Windows Anti-Virus ➜
– Recommended VPN Service ➜
– Recommended Web Browser ➜
– Website Recommendations ➜
– My Gear ➜
💻🖥 Contact Me 🖥💻
– Twitch (Check Schedule) ➜
– Patreon ➜
– Twitter ➜
┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅┅
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps supports the channel and allows us to continue to make videos like this. Thank you for your support!

Nguồn: https://indiametechnical.com/

Xem thêm bài viết khác: https://indiametechnical.com/tong-hop/

Article Categories:
Tổng Hợp

Comments

  • NEW TOOL NOT FEATURED – Check out Ventoy as it is very easy and works on any OS – https://www.ventoy.net/en/index.html
    DISCLAIMER: There are multiple ways to do Multiboot but I picked YUMI because I need Windows, Linux, and Utilities all within a single USB drive. Many other utilities I found just didn't accomplish this task. YUMI was the best for using both Windows and Linux based systems. I just wanted to showcase you can use some Windows tools like YUMI on Linux without issue.

    Chris Titus Tech July 4, 2020 10:54 am Reply
  • I can only boot windows and linux isos in legacy mode not uefi for some reason from ventoy, any idea why this is? Tried to google the problem but got no answer.

    Fredrik July 4, 2020 10:54 am Reply
  • Hey Chrius can you help ? I saw that you are also using ASUS PC. So my problem is that i created an admin password for bios but i forgot. now i cannot access my bios or change bios settings. can i remove admin password ? or there is any other to change configuration of bios without entering the password.

    Pragit Raj July 4, 2020 10:54 am Reply
  • i use easy2boot mainly because i can have >4gb files on the pendrive

    Victor Hideki Cho July 4, 2020 10:54 am Reply
  • i used to use YUMI a lot. it worked for most of what i needed when i needed to live boot without breaking something. then i found Ventoy, and it has been basically the same, only slightly less hassle.

    CaptainBlackass July 4, 2020 10:54 am Reply
  • Ventoy is better than this I think mr ctt

    Thirumalaiselvan M July 4, 2020 10:54 am Reply
  • Which OS are u actually using ?🤔🤔🤔

    Orbit Turner July 4, 2020 10:54 am Reply
  • "ventoy" is better alternative

    Mihir Gosai July 4, 2020 10:54 am Reply
  • i can say ventoo is far better and superior. thank me later

    O_O July 4, 2020 10:54 am Reply
  • Hey! Can you tell me is there anyway to create a multiboot USB that works on Mac OSX ?

    Shaz Rehman July 4, 2020 10:54 am Reply
  • This is a great tool. But I found it more time consuming than easy to boot. It can be only in my case though.🤦‍♂️

    Vishal Sharma July 4, 2020 10:54 am Reply
  • I recommend you try Easy2Boot – I've been using it for over 6 years and it my feeling is that nothing else still comes close to it as far as functionality and robustness goes. There is a learning curve if you want to use all if it's advanced features but it's actually very easy to set up for basic use.

    Dackovic Ivan July 4, 2020 10:54 am Reply
  • There is one problem with YUMI – you need to use fat32 partition to create multiboot USB. But if your windows 10 iso takes more than 4GB (and it does), you can't add that iso to multiboot, because fat32 is restricted by 4GB single file maximum.

    Yurii F July 4, 2020 10:54 am Reply
  • wtb Ventoy https://youtu.be/_3p-f_Cwa4g

    David Lomas July 4, 2020 10:54 am Reply
  • Wow, this video is so far behind the times. YUMI has been around for years and it's limited to what is had on it's list (which is, admittedly, a lot) but it's got some installers that are buggy. Ventoy is, i admit, a pretty cool but it (also) has some buggy features with certain types of ISOs as well. Neither are perfect but as far as time and effort goes (even GUI) Ventoy is superior. YUMI has been building up it's inventory for a long time and really had the wind taken out of it's sails when Ventoy came along.

    Kilroy 5150 July 4, 2020 10:54 am Reply
  • You can take a look at Ventoy (ventoy.net)
    * Works on Linux/Windows
    * Drag and drop different ISOs
    * Opensource

    Sumitro Bhaumik July 4, 2020 10:54 am Reply
  • i've been using yumi for years now, though there is a new guy in town
    how about a vid comparing ventoy and yumi?

    Raymond Neil Cerezo July 4, 2020 10:54 am Reply
  • i'm trying to install WinPE 10-8 Sergei Strelec on yumi but without success , any ideas ?

    j.k July 4, 2020 10:54 am Reply
  • hello sir, may i know what is the differences between pendrivelinux yumi vs ventoy? which one is better? sorry for this noob questions, i'm new to this. just want to make sure it can run live linux rather than installation. thank you and have a nice day. 🙂

    ZamSEG July 4, 2020 10:54 am Reply
  • but y would i need anything other than debian

    Fake_Name131 July 4, 2020 10:54 am Reply
  • What do you think about Ventoy.net? You install it on a flash drive and just copy the ISO onto the drive, then just boot and pick the ISO from the menu. Also you can use it as a normal flash drive too.

    Jeff Smith July 4, 2020 10:54 am Reply
  • i recommend ventoy just install drag and drop the iso files, finish now u can boot and install your new OS

    jhordan meneses July 4, 2020 10:54 am Reply
  • How about Ventoy?

    George K. July 4, 2020 10:54 am Reply
  • Ventoy – just came across it
    An open source tool to create bootable USB drive for ISO files, you don't need to format the disk again and again, you just need to copy the iso file to the USB drive and boot it.
    Both Legacy BIOS and UEFI are supported in the same way

    deejayMarks July 4, 2020 10:54 am Reply
  • Chris checkout Ventoy

    Sean K. July 4, 2020 10:54 am Reply
  • The iso file install only 5 mb in my USB out of 4.9 gb of the windows iso. i tried yumi and woeusb both only install a few mbs on my usb. The usb is empty, i tried with NTSF and FAT32, also get this…An error (1) occured while executing syslinux. Your USB won't be bootable .
    Ive been trying to fix this for the last 3 days never thought making a bootable USB on Linux would be so annoying, i hope anyone can help…sorry about my english i hope is understandable

    chungies July 4, 2020 10:54 am Reply
  • Have you tried Ventoy? If yes why is your solution better? Thanks

    cepi24 July 4, 2020 10:54 am Reply
  • The easiest way I do is to make multiple fat32 partitions on my flash drive & then flash different ISOs using unetbootin into different partitions (ex. sdc1, sdc2, sdc3, etc.)
    Then you can boot into any partition in the same way as you do inside uefi boot manager (f8)

    Prem Koomr July 4, 2020 10:54 am Reply
  • Hi is there any performance different for a HDD <= 2TB run in GPT format ?? I have 2 x 2TB Seagate HDD which i try both MBR vs GPT but fail to sense any different at all. Thanks first for the reply

    Mr Potato July 4, 2020 10:54 am Reply
  • nice ScreenSaver,
    is that ZMatrix_NT?
    this one was great when i used it on XP with code Emulating any image set as your Wallpaper,
    was like a code style "Dot Stippling" effect but now it wont allow the icons and takbar up top.
    if anyone knows how to mod it for recent day use,
    i'd highly reccomend ZMatrix as it is open source but i'm not much of a coder

    http://zmatrix.sourceforge.net/

    The .Unjust July 4, 2020 10:54 am Reply

Leave a Reply

Your email address will not be published. Required fields are marked *